English
ไทย
한국어
日本語
svenska
Product Category
Products
Heat sealing for food, medicine and plastic bag; Gasket on press plate of heat seal, gasket for friction surface of chute and hopper, hot melt glue, gasket for sewing machine, and gasket needing to use non-adhesive, slidable and heat resistant parts; Adhesive tape for carpet use……
Wide application of wind blades, composite mold release; Smooth friction coefficient 0.1; Not sticky, even high viscosity fluids are difficult to adhere; Drug resistance Most drugs can be used; Weather resistance is hardly degraded….
The glass fiber aluminum foil tape is made of high-quality silicate fiber as the substrate. It is made of Germany with unique, fine and high-precision technology, advanced composite technology and aluminum foil as the base of the tape. After special surface treatment, it is coated on one side. Layer adhesive (common temperature resistance/high temperature resistance) to produce roll-shaped self-adhesive tape, the surface of the aluminum foil is smooth and flat, high light reflectivity, large tensile strength in the longitudinal and transverse directions, airtight, impervious to water, good sealing performance. It has high shielding rate and strong material toughness. It can effectively shield the electronic interference generated by any electronic equipment….
Woven roving combo mat is made of woven roving and chopped fiberglass strand complex of, then stitched together with polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, Auto parts, refrigerated tools and structural sections industry etc, suitable for hand lay up, RTM, pultrusion, vacuum processes….
Fiberglass triaxial fabric is made of fiberglass direct roving parallel aligned in 0°,+45°,-45°or +45°,90°,-45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes….
Fiberglass stitched mat is made of chopped fiberglass strands in a certain length, then freely put and stitched together with polyester tissue or carbon fiber tissue by polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes….
Fiberglass stitch bonded fabric is made of fiberglass direct roving parallel aligned in 0°and 90°directions, then stitched together with chopped strand layer or polyester tissue layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, flat panels etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes….
Fiberglass double biaxial fabric is made of fiberglass direct roving parallel aligned in +45°and -45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes….
Multiaxial core mat is made of biaxial fabric (0°and 90°) combined middle layer PP, PET or Nylon core material and plus the chopped strands layer, then stitched together like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, storage tanks etc, suitable for RTM, Vacuum infusion, hand lay-up forming processes….
Chopped core mat is made of fiberglass chopped strands stitched by polyester yarn together with PP, PET or Nylon core materials like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, flat panels etc, suitable for RTM, vacuum infusion, hand lay up forming processes….
Fiberglass single axial fabric is made of fiberglass direct roving parallel aligned in 90°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes….
INQUIRE NOW
If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.
- Factory-direct Connectivity Solutions.
- High quality, Competitive Price.
- Custom-tailored solutions.
- Problem-solving approach.