+86-13961762092 |  0510-80229966 / 0510-80229955 / 139-6176-2092|   evelyn@wxfirst.com
EnglishEnglish

loading

Share to:
sharethis sharing button

Single Warp Fiberglass Fabric

Single warp fiberglass fabric is made of fiberglass direct roving parallel aligned in 0°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes.
Availability:
Inquire


SpecificationWeight (g/m2)Warp (g/m2)Weft (g/m2)Chop strands (g/m2)Polyester tissue(g/m2)Layer
FSDL336336336---1
FSDL400400400---1
FSDL420420400---1
FSDL560560560---1
FSDL600600420180--2
FSD-LM625625400-225-2
FSD-LM625/N45670400-225453
FSDL672672672---1
FSDL800800672128--2
FSD-LM900600600-300-2


Roll width

Standard width in 1200mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm.


Packing

Fiberglass stitched mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.


Storage

The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.


Previous: 
Next: 

INQUIRE NOW

If you would like to have a question then get in touch today, we are ready to assist 24/7.
We welcome your cooperation and we will develop with you.

Factory-direct Connectivity Solutions.
High quality, Competitive Price.
Custom-tailored solutions.
Problem-solving approach.