Woven roving combo mat is made of woven roving and chopped fiberglass strand complex of, then stitched together with polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, Auto parts, refrigerated tools and structural sections industry etc, suitable for hand lay up, RTM, pultrusion, vacuum processes.

Fiberglass triaxial fabric is made of fiberglass direct roving parallel aligned in 0°,+45°,-45°or +45°,90°,-45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes.

Fiberglass stitched mat is made of chopped fiberglass strands in a certain length, then freely put and stitched together with polyester tissue or carbon fiber tissue by polyester yarn. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in pultrusion pipes and tanks, FRP boat, insulation panels, anode tubes, auto parts, bath tubes etc, suitable for pultrusion, filament winding, RTM, hand lay-up processes.

Fiberglass stitch bonded fabric is made of fiberglass direct roving parallel aligned in 0°and 90°directions, then stitched together with chopped strand layer or polyester tissue layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, flat panels etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes.

Fiberglass double biaxial fabric is made of fiberglass direct roving parallel aligned in +45°and -45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes.

Multiaxial core mat is made of biaxial fabric (0°and 90°) combined middle layer PP, PET or Nylon core material and plus the chopped strands layer, then stitched together like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, storage tanks etc, suitable for RTM, Vacuum infusion, hand lay-up forming processes.

Chopped core mat is made of fiberglass chopped strands stitched by polyester yarn together with PP, PET or Nylon core materials like sandwich design. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, train parts, flat panels etc, suitable for RTM, vacuum infusion, hand lay up forming processes.

Fiberglass single axial fabric is made of fiberglass direct roving parallel aligned in 90°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes.

Single warp fiberglass fabric is made of fiberglass direct roving parallel aligned in 0°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes.

High quality products of PTFE Adhesive Tape are made by professional staff and have strong durability. Our company is one of the earliest companies do research, exploitation and production of “PTFE TAPE”.

Heat sealing for food, medicine and plastic bag; Gasket on press plate of heat seal, gasket for friction surface of chute and hopper, hot melt glue, gasket for sewing machine, and gasket needing to use non-adhesive, slidable and heat resistant parts; Adhesive tape for carpet use...

Wide application of wind blades, composite mold release; Smooth friction coefficient 0.1; Not sticky, even high viscosity fluids are difficult to adhere; Drug resistance Most drugs can be used; Weather resistance is hardly degraded.

The glass fiber aluminum foil tape is made of high-quality silicate fiber as the substrate. It is made of Germany with unique, fine and high-precision technology, advanced composite technology and aluminum foil as the base of the tape. After special surface treatment, it is coated on one side. Layer adhesive (common temperature resistance/high temperature resistance) to produce roll-shaped self-adhesive tape, the surface of the aluminum foil is smooth and flat, high light reflectivity, large tensile strength in the longitudinal and transverse directions, airtight, impervious to water, good sealing performance. It has high shielding rate and strong material toughness. It can effectively shield the electronic interference generated by any electronic equipment.

Heat resistant suite-pipeline of silicon rubber fiber is made of high-puff fiberglass and coated with massive silicon rubber. This product could protect outburst of molten iron, molten copper and molten aluminum, and the spoil of high temperature or fire; it could protect spoil of continually putting under the high temperature of 260℃, under the highest temperature of 1090℃, it could work for 5-10 minute, and under the condition of 1650℃, it could work for 15~30 seconds.

Ceramic fiber product is a new inorganic heat insulating and fire resisting material, and it has the characteristics of light weight, small thermal capacity, good capability of heat maintaining and high temperature insulating, good steady of chemical ability, corrosion resistant, oxidation resistant, etc.
Ceramic fiber product uses ceramic fiber as its raw material. The ceramic fiber textile which weaved by special weaving process and manufacture equipment not only has the characteristics of the above ceramic fiber product, but also has the characteristics of high intensity, steady external size, shaking proofing, concussion resisting under high temperature, its physical capability and chemical capability could return to the original status.

ceramic fiber sleeve is manufactured from aluminum silicate fiber bulk spinning from kaolinite, alumina silicon dioxide and zircon sand, which been series processing of needling ,cutting and rollings, including 1260°C Standard, 1260°C High pure, 1360°C High Aluminum, 1430°C Zirconium ceramic fiber blanket.
The ceramic fiber blanket with the advantage of uniform quality, smoothly surface ,pure white color, completely inorganic ,good tensile strength, toughness and fiber structure, so there are no flames when heating for the first time , The working temperature ranges from 950°C to 1430 °C.

Ceramic fiber tape uses ceramic fiber as its raw material. The ceramic fiber textile which weaved by special weaving process and manufacture equipment not only has the characteristics of the above ceramic fiber product, but also has the characteristics of high intensity, steady external size, shaking proofing, concussion resisting under high temperature, its physical capability and chemical capability could return to the original status.

Product advantages ：
1. good dimensional stability
2. Good surface finish
3. Good weather resistance
4. Convenient installation

Product advantages ：
1. Good dimensional stability
2. Good strength and good toughness.
3. Good weather resistance
4. Convenient installation

Product characteristics ：
1.High oxygen index.
2. low density .
3. corrosion preventive.
4. High intensity.